Maverick5
08-26 05:20 PM
Thanks for your reply. As I am applying for LC with Software Engineer, and my Masters is in Mech Engg, I have asked my employer to put "Computer Science, Engineering (Any), Math or Related" in the majors required for the position.
I am hoping that Engineering (Any) would cover for Mech Engg.
I am hoping that Engineering (Any) would cover for Mech Engg.
wallpaper 1999 Ford Lightning - Lincoln
Queen Josephine
May 23rd, 2005, 10:34 AM
I like them all Gary, but agree with Chris about the cloning out that bright white rock , or whatever it is, in the first one. Also, unless you've been there before, it's difficult to capture the enormity of those rocks. The footpath catches my eye in the second photo which gives some perspective on where you are positioned. It looks like you are a quite a bit above and working your way down to the path. The 3rd pic looks like a crop? of the upper-center of the 2nd pic? And lastly, can I apply for a job where you work so I can travel too!
priderock
03-27 09:55 AM
It is truly amazing how people give advise on legally sensitive issues without verifying the facts. People go to the lengths of suggesting work off the books in an open forum (Admin was right to cut him/her off right away).
It is always good idea to consult a lawyer on these matters. You may be breaking the law unwittingly.
AFAIK (I am not a lawyer, consult a lawyer) , you can't work even for free if that job is NOT usually done for free. For example you can't work as a developer for a software development company for free.You may call it volunteer work but it has to be truly volunteer work, meaning others also do this work as volunteers.
It is always good idea to consult a lawyer on these matters. You may be breaking the law unwittingly.
AFAIK (I am not a lawyer, consult a lawyer) , you can't work even for free if that job is NOT usually done for free. For example you can't work as a developer for a software development company for free.You may call it volunteer work but it has to be truly volunteer work, meaning others also do this work as volunteers.
2011 Ford F-150 SVT Lightning - Front Angle, 2001
Suva
08-14 11:14 AM
Why are you taking all the H1s into the calculation? This only applies to companies which has more than 50% H1 employees. So it does not apply to all the companies.
I dont agree with the laws passed, but here is the math to come up with the $600 million figure they are quoting.
# of possible H1Bs = 85k (65k + 20k)
Fees (additional) = $2000
Total Fees = $170 million ($2k x 85k)
The fee increase is for 4 years = (2010-2014)
GRAND Total = $680 million ($170 million x 4)
I dont agree with the laws passed, but here is the math to come up with the $600 million figure they are quoting.
# of possible H1Bs = 85k (65k + 20k)
Fees (additional) = $2000
Total Fees = $170 million ($2k x 85k)
The fee increase is for 4 years = (2010-2014)
GRAND Total = $680 million ($170 million x 4)
more...
ramus
06-14 10:43 AM
Guys,
Don't create new thred for every single question you have.. You can find right thred and put it there..
Yes you can file for 485 even though your H1B extension is pending.
Hi,
My 8th year H1 extension is pending with CIS, and my current H1 expires on June 26, 07. Can I file my 485 when my H1 status is pending from CIS?
Please advise.:confused:
Don't create new thred for every single question you have.. You can find right thred and put it there..
Yes you can file for 485 even though your H1B extension is pending.
Hi,
My 8th year H1 extension is pending with CIS, and my current H1 expires on June 26, 07. Can I file my 485 when my H1 status is pending from CIS?
Please advise.:confused:
srikondoji
01-25 06:53 PM
When decision making people or people at the top talk, then i believe there is a sense of realization about us.
Atleast this should provide an easy opening of our case with top leaders.
I am not saying that is it, they are dispatching GCs through Fed-Ex?
If they did, i would be really surprised.
Atleast this should provide an easy opening of our case with top leaders.
I am not saying that is it, they are dispatching GCs through Fed-Ex?
If they did, i would be really surprised.
more...
srikanthmavurapu
08-16 03:25 PM
which state your employer belongs to?
its in Virginia
its in Virginia
2010 Rides 2004 Ford Lightning
jayram123
07-12 12:05 AM
If this is true it's really horrible and scary that this gov. agency is handling our applications.
It sounds like it's true. Man! I just wish somebody holds them accountable for this. Despite all efforts from DOS to not waste any more numbers by making all categories current, USCIS still wastes them. Shameful! USCIS should be completely rehauled.:(
It sounds like it's true. Man! I just wish somebody holds them accountable for this. Despite all efforts from DOS to not waste any more numbers by making all categories current, USCIS still wastes them. Shameful! USCIS should be completely rehauled.:(
more...
binadh
10-03 01:24 PM
No! not with the fargoman. Mine is a small time law firm based in Arlington VA.
hair not the first stock hot rod
GC08
01-28 04:16 PM
Yeah right... he wants your brain, but does not want your body. Got it? :rolleyes:
In case you did not, Americans only want you to come to work for them and then you will need to leave... so that they do not have to pay your social security down the road. Isn't that a good deal?
In case you did not, Americans only want you to come to work for them and then you will need to leave... so that they do not have to pay your social security down the road. Isn't that a good deal?
more...
Friend
02-19 09:17 AM
USCIS people rejected the Application. Now the application is with my Attorney. So which option I need to select the for the taking the Info Pass appointment. My Attorney is telling if they accept the application and they put any RFE so that we can take the Info Pass appointment is it correct?
Can you suggest which option i need to select for info pass appointment for my case?
Thanks for your valuable response.
Thanks.
Can you suggest which option i need to select for info pass appointment for my case?
Thanks for your valuable response.
Thanks.
hot Ford F-150 SVT Lightning
hpandey
06-02 04:17 PM
can i get a h1 done from a desi employer just to protect the h4 status and join the other company thats offering me a job with my ead.
the h1 from the desi employer will not be having pay stubs but thats only to get h1 status.
As Kaiserose pointed out the H1 quota is done for the year and will not open till April next year and start in Oct 2009 . Considering that you do get an H1 for your wife next year , make sure that she is working coz while applying for her I-485 they might ask for W2's and paystubs for her ( an H1 person cannot be without pay for such an extended period of time ).
Going on F1 is a good idea but I think for that you have to go back to your home country and get it stamped and come back ( can someone confirm this ?? ). This new regulation was put in place due to the security measures after 2001 . But best confirm with your lawyer.
the h1 from the desi employer will not be having pay stubs but thats only to get h1 status.
As Kaiserose pointed out the H1 quota is done for the year and will not open till April next year and start in Oct 2009 . Considering that you do get an H1 for your wife next year , make sure that she is working coz while applying for her I-485 they might ask for W2's and paystubs for her ( an H1 person cannot be without pay for such an extended period of time ).
Going on F1 is a good idea but I think for that you have to go back to your home country and get it stamped and come back ( can someone confirm this ?? ). This new regulation was put in place due to the security measures after 2001 . But best confirm with your lawyer.
more...
house 2005 Ford Lightning Concept
pappu
10-23 11:01 AM
Significance of Priority date???
PD is important to get your dates current faster. Earlier PD will get a better shot at being current early.
After your PD becomes current your 485s are assigned visa numbers (if your FP, namechecks and processing are done) GCs are allocated based on 3 important factors : Dates must be current, date the I485 was received (FIFO as per their SOP but factors like namechecks make it unfeasible) and country of chargeability. It is thus tough to review approval trends on tracker threads and sites because of small and incomplete data set and no info on factors that influence faster or slower I485 approvals.
Coming back to the country quota, I do not know how country quotas are allocated throughout the year. How overflow happens each month/quarter and how future demand is predicted each month for the entire year when providing visas to oversubscribed countries from the quota of under subscribed countries. This will be a good topic to research.
PD is important to get your dates current faster. Earlier PD will get a better shot at being current early.
After your PD becomes current your 485s are assigned visa numbers (if your FP, namechecks and processing are done) GCs are allocated based on 3 important factors : Dates must be current, date the I485 was received (FIFO as per their SOP but factors like namechecks make it unfeasible) and country of chargeability. It is thus tough to review approval trends on tracker threads and sites because of small and incomplete data set and no info on factors that influence faster or slower I485 approvals.
Coming back to the country quota, I do not know how country quotas are allocated throughout the year. How overflow happens each month/quarter and how future demand is predicted each month for the entire year when providing visas to oversubscribed countries from the quota of under subscribed countries. This will be a good topic to research.
tattoo 2003 Ford Lightning Test
cagedcactus
11-21 06:54 AM
Yes pappu, you are right.
I just sent the email explaining the proper differences between H-1B and Immigration catagories.
I just sent the email explaining the proper differences between H-1B and Immigration catagories.
more...
pictures lightning wallpapers.
yabadaba
06-21 07:35 AM
Although that the rule..I dont think USCIS actively follows it. The reason for that being the ombudsman report that states that the adjudicating officers pick low hanging fruit first (simple strforward cases) and that is reflected on where people have been getting their 485 approved within 90 days (which the ombudsman's report states is uscis's goal). right now the processing date is holding at 9 months. maybe to dissuade people from continously calling the NSC 1800 number.
dresses Ford F-150 SVT Lightning
srsrsr
07-20 06:09 PM
My PD is Nov 2004, I got 140 approved. Im not filing 485 now as im unmarried.
Any ideas when can be the date current again(for my PD atleast)?
Any ideas when can be the date current again(for my PD atleast)?
more...
makeup ford lightning wallpaper - 145223. Overall Rating:
snathan
05-19 04:25 PM
The statue of limitation is, i believe, 2 years.
No, its only 12 months.
No, its only 12 months.
girlfriend Ford Lightning Hot Rod
gparr
November 25th, 2005, 04:38 PM
My primary tip is patience. When the wind is blowing, even slightly, if you're patient you will start to get in tune with the wind and be able to pick out the calm moments that always occur. You just have to be ready and then get off as many shots as possible during that calm moment. I shoot as many of my flower shots as I can very early or very late in the day. By very early, I mean at or just after sunrise. The wind is usually calm for a short while until the sun starts to heat the admosphere. I've had considerable success shooting in the very soft light at or after sunset, when the wind also calms. Long shutter speeds though. Unfortunately, too many blooms aren't open until the sun is higher in the sky and you have to resort to patience.
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.
Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.
I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.
These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.
When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.
As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.
But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary
hairstyles 2009 1999 Ford Lightning
ck_b2001
07-20 09:07 PM
Yes, it's definitely a issue. Talk to your lawyer immediately.
Even though the form looks similar, G-325A requires 4 copies where G-325 has only 2 copies. I was almost about to make the same mistake.
No big deal....you should worry if you have signature missing, check not included, wrong fee, no medical exam etc. Others are trivial things and could only delay processing by few week or at most an RFE. you are not the only one who is making mistakes. There would be thousand who have made some mistake, some without knowing about it.
Even though the form looks similar, G-325A requires 4 copies where G-325 has only 2 copies. I was almost about to make the same mistake.
No big deal....you should worry if you have signature missing, check not included, wrong fee, no medical exam etc. Others are trivial things and could only delay processing by few week or at most an RFE. you are not the only one who is making mistakes. There would be thousand who have made some mistake, some without knowing about it.
sangeethak31
07-15 12:16 PM
As I am going for a H1 Visa renewal, I am not having an attorney.
Could someone please provide me a template.
Thanks,
Sangeetha K
Could someone please provide me a template.
Thanks,
Sangeetha K
mambarg
07-27 07:04 PM
How did the attorney sign the form when you had not signed.
I had to visit my attorney's office and sign all the paperwork in his office before he filed my app.
I belileve if the attorney is remote, then he needs to send fedex package to sign the docs.
Attorney signs only as a rep if there is legal issues or court apperance is required.
Applicants signature is used to prepare the EAD card . USCIS scans the signature of applicant.
I had to visit my attorney's office and sign all the paperwork in his office before he filed my app.
I belileve if the attorney is remote, then he needs to send fedex package to sign the docs.
Attorney signs only as a rep if there is legal issues or court apperance is required.
Applicants signature is used to prepare the EAD card . USCIS scans the signature of applicant.
No comments:
Post a Comment